Select Language:
< Back SUCUPIRA PRETA (Diplotropis martiusii) Print Friendly View
Sucupira Preta
Diplotropis martiusii Benth.
LEGUMINOSAE
Sucupira-Parda (Brazil); Chontaquiro (Peru)
Dibrachion riparium Spruce ex Benth.; Bowdichia martiusii (Benth.) Ducke
This tree is reported to be of medium size, attaining heights of 20 m in the average. The boles are clear to lengths of about 14 m, with diameters between 60 to 70 cm.
Diplotropis martiusii is widespread in tropical South America. It prefers non-inundable areas in primary and secondary forests.
The species is reported to occur in northern tropical South America, down to Peru. In Peru it is reported in Yurimaguas, Tamishiyacu, Requena and Pucallpa.
Wood diffuse porous. Vessels solitary and in short radial multiples. Occasionally tangential diameter of vessel lumina 200 micras or more. Occasionally white deposits in heartwood vessels. Occasionally vessels per mm2 less than 6. Simple perforation plates. Ves Occasionally axial parenchyma in marginal or in seemingly marginal bands. Axial parenchyma lozenge-aliform. Axial parenchyma confluent. Occasionally prismatic crystals in chambered axial parenchyma cells and/or in fibers. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays 1 to 4 seriate. Occasionally heterogeneous rays and/or multiseriate heterogeneous rays. Body ray cells procumbent with mostly 2 to 4 rows of upright and/or square marginal cells (Kribs-II). Fibers with simple to minutely bordered pits.
Unrestricted
Odor and taste are reported to be indistinct.
The sapwood is differentiated. The heartwood is dark brown to chocolate brown in color.
4
Grain is reported to be typically interlocked, producing a very fine silver figure.
The wood is coarse-textured.
It is very durable against decay and insects attack.
1
Silica Content: A negligible content of 0.04 % of silica is reported. Silica Value: 0.04
This timber responds poorly to preservative treatment.
0.81
0.93
6.1
4.1
Ease of Drying: Drying is reported as moderately rapid. Drying Defects: Risk of checking, cupping and twisting. Casehardening is also reported.
1.5
Sawing of this species is easy. Stellite tipped band saws are recommended.
The timber is reported to be suitable for slicing into decorative veneers.
The timber is reported to be suitable for slicing into decorative veneers.
The wood is reported to have moderate dulling effect on cutting edges.
Sucupira is hard and typically contains interlocked grain, factors which are reported to combine to make it a rather difficult wood to plane and work in most woodworking operations.
Molding operations are rated as fair.
30
Boring operations are fair.
The wood is difficult to nail, and requires pre-boring.
The wood is reported to finish well after filling.
EXTERIOR GENERAL, bridges, poles, paling, stakes posts, rails, crossarms, crossties, HOUSING GENERAL, beams, joists, boards, flooring, frames, steps, FURNITURE AND CABINETS, PLYWOOD AND VENEER, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, TOOLS, tool handles, agricultural tools, CONTAINERS, truck bodies, truck flooring, NAVAL CONSTRUCTION, boat deck, OTHER AND MUSICAL INSTRUMENTS, yoke
Please Provide Information To View Producer Information