Select Language:
< Back PADOUK D`AFRIQUE (Pterocarpus tinctorius) Print Friendly View
Padouk d`Afrique
Pterocarpus tinctorius Welw.
LEGUMINOSAE
Paduk (Italy); Padoek (Netherlands); Padouk (Germany); Barwood (United Kingdom); Camwood (United Kingdom); African Padauk (United Kingdom); Padauk (United Kingdom); Corail (Belgium); Mongola (Zaire); Mukula (Zaire); N`gula (Zaire); Kisese (Congo); Mbel (Gabon); Mbel (Cameroon); Osun (Nigeria); Nkula (Zaire); Tacula (Angola); Palo rojo (Equatorial Guinea)
Pterocarpus zimmermannii Harms; Pterocarpus velutinus De Wild.; Pterocarpus tinctorius var. macrophyllus Welw. ex Baker; Pterocarpus tinctorius var. odoratus (De Wild.) Hauman; Pterocarpus tinctorius var. chrysothrix (Taub.) Hauman; Pterocarpus odoratus De Wild.; Pterocarpus megalocarpus Harms; Pterocarpus kaessneri Harms; Pterocarpus holtzii Harms; Pterocarpus hockii De Wild.; Pterocarpus delevoyi De Wild.; Pterocarpus chrysothrix Taub.; Pterocarpus cabrae De Wild.; Pterocarpus albopubescens Hauman; Lingoum tinctorium (Welw.) Kuntze
The bole is usually straight and cylindrical, up to 15 m long. It presents low buttresses or no buttresses at all. Log is banned for international trading.(Cameroon)
Pterocarpus tinctorius occurs in riparian forests, secondary formations and grass savanna.
Vessels per mm2 less than 6 (rare). Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 200 micras or more (large). Vestured pits. Simple perforation plates. Intervessel pits large, 10 micras or more. Paratracheal axial parenchyma scanty and/or vasicentric. Axial parenchyma aliform. Axial parenchyma confluent. Axial parenchyma in marginal or in seemingly marginal bands. Prismatic crystals in short chains in chambered axial parenchyma cells. Two cells per pa Rays exclusively uniseriate. Non-crystals in ray cells. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
2
Wavy; special care is needed when machining in order to obtain satisfying quality surface.
The wood is mostly coarse in texture.
The wood luster is reported to be rather low.
Moderately durable to decay. Without preservative treatment, this species can be used only under risk of occasional re-humidification. It is not suited for uses with risks of permanent or long-lasting humidification. Resistant to termites attacks.
1
No residual stresses are reported in this species.
Silica Content: Negligible content of silica is reported. Amounts over 0.05% may affect wood processing. Silica Value: 0
Difficult to treat with only a low penetration of the preservative products.
0.80
0.92
5.2
3.3
Ease of Drying: Drying is very slow and difficult to perform; defects are frequent. Drying Defects: Risks of distortions. Kiln Schedules: Schedule proposed as a reference by comparison with well known species taking into account to the general technological behavior of this species.
FR-4
1.6
1064
190955
795
115
52
1063
1098
Suitable for slicing.
Suitable for slicing.
Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.
Moderately easy; tools must be cautiously sharpened.
Easy; no particular problems.
30
Easy; no particular problems.
Easy; no particular problems.
Pre-boring is necessary.
Difficult to glue because of the extracts content.
Easy to perform; it gives good results.
Needs pre-coating.
HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, CONTAINERS, truck bodies, truck flooring, NAVAL CONSTRUCTION, boats, boat hulls, boat deck, port storage, OTHER AND MUSICAL INSTRUMENTS, handicrafts
Please Provide Information To View Producer Information