Select Language:
< Back MEPEPE (Albizia adianthifolia) Print Friendly View
Mepepe
Albizia adianthifolia W.F.Wight
LEGUMINOSAE
Singuingui (Guinea); Bangbaye (Côte d`Ivoire); West African Albizia (United Kingdom); Mushebele (Zaire); Kasa-kasa (Zaire); Saliémo (Cameroon); Omulera (Uganda); Omulera (Tanzania); Omulera (Kenya); Omulera (Ethiopia); Mepepe (Mozambique); Muanza (Angola); Za-nasa; West African albizzia; Saliemo; Rough-bark flat-crown; Pampena; Mwanse; Mutanga kuwana; Mutanga; Mushongo; Mushebere; Mushebele; Musase wa mpata; Munjerenje; Muluangalunga; Mucherenje; Mubanse; Mtanga; Mepepe; Maraga; M`gerenge; Kassa kassa; Kapetansofu; Kabanzibanzi; Bangbaye; Ayinre bona
Mimosa adianthifolia Schum.; Albizia fastigiata (E. Mey) Oliv.
The tree may reaches a height of 40 to 50 m with a trunk diameter of 70 to 100 cm. The bole is mostly clear, from 10 to 20 m in length, with small buttresses. In dry areas it is prone to crook and twist.
Albizia adianthifolia occurs in coastal, lower and savanna forests.
West Africa, from Senegal to Uganda.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 200 micras or more (large). Vestured pits. Vessels per mm2 less than 6 (rare). Simple perforation plates. Vessel-ray pits similar to intervessel pits Paratracheal axial parenchyma scanty and/or vasicentric. Axial parenchyma lozenge-aliform. Prismatic crystals in chambered axial parenchyma cells and/or in fibers. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays non-storied. Rays 1 to 4 seriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Septate fibers present. Fibers with simple to minutely bordered pits.
Unrestricted
The sapwood is white or white-yellow, it has a thickness of 5 cm. The heartwood is golden-yellow or light-brown, sometimes with a greenish tinge, it is clearly demarcated.
Straight or slightly interlocked, sometimes with an influence on further processing operations.
This wood has a somewhat medium texture.
The wood luster is reported to be rather low.
Not durable; important risks of decay attacks at any processing step, from logs up to final products. It must receive preservative treatment. Sensible to termites attack. Heartwood is sensible to Lyctus attacks.
5
No residual stresses are reported in this species.
Silica Content: It is reported to have a negligible amount of silica. Contents over 0.05% may affect wood processing. Silica Value: 0
Difficult to treat with only a low penetration of the preservative products.
0.4934765172
0.54
Ease of Drying: Air seasoning is generally reported to be rapid.. Drying Defects: Tendency to warp is reported. Kiln Schedules: Careful drying is recommended.
FR-6
903
117806
565
73
351
455
It is easy to saw.
Not suitable for veneering.
Not suitable for veneering.
Slight blunting effect; ordinary tools can be used for sawing and machining.
Machining of this species is reportedly easy.
Easy; no particular problems.
Easy; no particular problems.
30
Easy; no particular problems.
Easy; no particular problems.
No particular problem.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Can be polished without surface preparation.
No particular problems.
EXTERIOR GENERAL, rails, HOUSING GENERAL, beams, joists, boards, flooring, steps, panelling, fittings, shutter boards, FURNITURE AND CABINETS, common furniture, cabinets, TURNING, ornaments, turned furniture, cutlery, lasts, PACKING, heavy packing, pallets, OTHER AND MUSICAL INSTRUMENTS, handicrafts, door core, coffin
Please Provide Information To View Producer Information