Select Language:
< Back BOMANGA (Brachystegia laurentii) Print Friendly View
Bomanga
Brachystegia laurentii Louis
LEGUMINOSAE
Bomanga (France); Ariella (for sliced veneers) (France); Ariella (for sliced veneers) (United Kingdom); Ekop-Léké (Cameroon); Ekop-Evène (Cameroon); Nzang (Gabon); Ekop evene (Cameroon); Ariella (United Kingdom); Ariella (France); Bomanga (Zaire); Yegna (Gabon)
Macrolobium laurentii De Wild.
The tree reaches a height of 30 to 40 m, with trunk diameters up to 150 cm. The bole is tall, slender, straight and cylindrical up to 20 m.
Brachystegia laurentii occurs in dense rain forest and along rivers.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 200 micras or more (large). Vessels per mm2 less than 6 (rare). Simple perforation plates. Vessel-ray pits similar to intervessel pits in size and s Axial parenchyma in marginal or in seemingly marginal bands. Axial parenchyma lozenge-aliform. Prismatic crystals in chambered axial parenchyma cells and/or in fibers. 3 to 4 cells per parenchyma strand. Rays more than 10 per mm (abundant). Rays and/or axial elements irregularly storied. Rays exclusively uniseriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The sapwood is yellowish white, it has a thickness of 10 to 15 cm. The heartwood is light brown to copper brown, it is clearly demarcated. The silver figure is fine (barely visible).
5
Straight or slightly interlocked, sometimes with an influence on further processing operations.
The texture is mostly medium to coarse.
Moderately durable to decay. Without preservative treatment, this species can be used only under risk of occasional re-humidification. It is not suited for uses with risks of permanent or long-lasting humidification. Moderately resistant to termites attack
3
No residual stresses are reported in this species.
Silica Content: It is reported to have a negligible amount of silica. Contents over 0.05% may affect wood processing. Silica Value: 0.01
Difficult to treat with only a low penetration of the preservative products.
0.52
0.57
5.9
3.7
Ease of Drying: The wood is difficult to season. Drying Defects: Warping, splitting and surface-checking are recorded. Kiln Schedules: Kiln drying at low temperatures is possible.
FR-7
1.6
920
132576
493
61
63
396
500
It is easy to saw.
Suitable for slicing and peeling.
Suitable for slicing and peeling.
Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.
Machining of this species is reportedly easy.
Moderately easy; tools must be cautiously sharpened.
Easy; no particular problems.
30
Easy; no particular problems.
Easy; no particular problems.
No particular problem.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Needs pre-coating.
No particular problems.
HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, CONTAINERS, cooperage, OTHER AND MUSICAL INSTRUMENTS, door core, coffin, cementboard
Please Provide Information To View Producer Information