Select Language:
Aglaia
Aglaia lawii (Wight) Saldantha ex Ramamoorthy
MELIACEAE
Sulmin (Philippines); Tagat thitto (Myanmar); Sang katong (Thailand); Salotoi (Philippines); Segera (Sarawak); Lasat-lasat (Sabah); Talisaian (Philippines); Aisnepapir (West Irian); Lasih (Indonesia); Langsat lutung (Indonesia); Kayu jangan (Indonesia); Bekak (Malaysia)
It is a medium-sized to fairly large tree up to 40 m tall. The bole is branchless for up to 15 m and up to 200 cm in diameter, fluted or with buttresses up to 1.8 m high.
This tree occurs in primary or secondary evergreen to deciduous forests, from the sea level up to 1,650 m of altitude.
Wood diffuse porous. Colored deposits in heartwood vessels. Vessels per mm2 5 to 20. Simple perforation plates. Intervessel pits small, 7 micras or less. Apotracheal axial parenchyma diffuse and/or diffuse in aggregates. Axial parenchyma winged aliform (uni or bilateral winged). Axial parenchyma confluent. Prismatic crystals in non-chambered axial parenchyma cells. 5 to 8 cells per parenchyma strand. Body ray cells procumbent with one row of upright and/or square marginal cells (Kribs-III). Fibers with simple to minutely bordered pits.
Unrestricted
The wood often has a fragrant, sometimes even pungent, odor when fresh, resembling both cedar and camphor.
The heartwood is pale red to dark reddish-brown, sometimes turning to walnut-brown or chestnut-brown, usually distinctly demarcated from the pale yellow to pale red-brown sapwood.
5
The grain is interlocked, sometimes straight.
The texture varies from moderately fine to moderately coarse.
The wood is rated as moderately durable, even in contact with the ground.
3
The heartwood is often very difficult to treat with preservatives, the sapwood is moderately easy to easy.
0.6788546079
0.76
8.4
5.0
Ease of Drying: Drying is slow and rather difficult. Boards of 15 mm thick take about 3 months to air dry. Drying Defects: Resin exudation is reported to be common, especially when drying at high temperatures. It is prone to cupping, bowing, springing and end checking. Usually there is little splitting, surface checking, staining and insect attack during drying. Kiln Schedules: Schedule proposed for Apitong.
JP-26
1.7
1478
160798
This wood saws well, but it requires much power in sawing.
Veneer may warp severely during drying.
Veneer may warp severely during drying.
Wood processing is reported to be easy.
Because of its grain it requires sharp and fine set planes, however, planed surfaces are smooth and lustrous.
30
It is reported to have a good nailing behavior.
This species is easy to glue.
Wood of this species is easy to finish.
EXTERIOR GENERAL, bridges, HOUSING GENERAL, flooring, FURNITURE AND CABINETS, cabinets, PLYWOOD AND VENEER, Decorative veneer, TURNING, SPORTS, TOOLS, tool handles, agricultural tools, NAVAL CONSTRUCTION
Please Provide Information To View Producer Information