Select Language:
Ebiara
Berlinia bracteosa Benth.
LEGUMINOSAE
Sarkpei (Sierra Leone); M'possa (Zaire); M'possa (Congo); M'possa (Angola); Sarkpei; Obolo; Berlinia (Germany); Berlinia (United Kingdom); M`possa (Zaire); M`possa (Congo); Ebiara (Gabon); Essabem (Cameroon); Abem (Cameroon); Ekpogoi (Nigeria); Melegba (Côte d`Ivoire); Pocouli (Côte d`Ivoire)
Westia bracteosa (Benth.) J.F. Macbr.; Macroberlinia bracteosa (Benth.) Hauman; Berlinia platycarpa Pierre ex De Wild.; Berlinia mayumbensis De Wild.
The tree reaches a height of 32 to 43 m, with diameters from 100 up to 170 cm. The boles are often irregular, sometimes fluted with low buttresses.
Berlinia bracteosa is found in various forest types like savanna formations, marshy localities, or dense forests.
West Africa and reaching to the Democratic Republic of the Congo.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 200 micras or more (large). Vestured pits. Vessels per mm2 less than 6 (rare). Simple perforation plates. Vessel-ray pits similar to intervessel pits Axial parenchyma in marginal or in seemingly marginal bands. Axial parenchyma thick lozenge-aliform. Axial parenchyma aliform. Occasionally axial parenchyma confluent. Prismatic crystals in chambered axial parenchyma cells and/or in fibers. 3 to 4 cells per pa Rays more than 10 per mm (abundant). Rays non-storied. Rays 1 to 2 seriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The sapwood is whitish to pinkish, it has a thickness of 10 to 15 cm. The heartwood is pink brown to dark red brown with dark brown or purple streaks, it is clearly demarcated.
5
Straight or slightly interlocked, sometimes with an influence on further processing operations.
The texture is mostly medium to coarse.
Moderately durable to decay. Without preservative treatment, this species can be used only under risk of occasional re-humidification. It is not suited for uses with risks of permanent or long-lasting humidification. Moderately resistant to termites attack
3
For this species no growth stresses are reported.
Silica Content: It is reported to have a negligible amount of silica. Contents over 0.05% may affect wood processing. Silica Value: 0
Difficult to treat with only a low penetration of the preservative products.
0.61
0.68
6.9
2.7
Ease of Drying: Air seasoning is moderately difficult but with little or no degrade. Drying Defects: Risk of end splitting and surface checking. Kiln Schedules: Kiln drying gives good results.
FR-6
2.6
1007
111600
633
85
78
567
666
It is easy to saw.
Suitable for slicing, also suitable for peeling if treated.
Suitable for slicing, also suitable for peeling if treated.
Slight blunting effect; ordinary tools can be used for sawing and machining.
Machining of this species is reportedly easy.
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
30
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
Pre-boring is necessary.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Needs pre-coating.
This species can be used for steam bending.
No particular problems.
HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, shutter boards, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, OTHER AND MUSICAL INSTRUMENTS, handicrafts
Please Provide Information To View Producer Information