Select Language:
Framiré
Terminalia ivorensis A.Chev.
COMBRETACEAE
Baji (Sierra Leone); Framiré (Côte d`Ivoire); Lidia (Cameroon); Yellow terminalia; Yellow pine; Ubiri; Tuhidya; Tuhidia; Tewogboye; Shingle wood; Satin-wood; Ronko; Owewe; Oweive; Ouhidji; Onidjo; Onhidgo; Okpoha; Nkondi; Nkombe; N`dagobrohia; Mboti; Lidia; Lauri; Kokango; Kekange; Ka ronko; Indigbo; Ijaws; Gbasi; Framine; Frameri; Fira-wase; Fela; Fataromile; Farayomile; Farayemile; F`araeneri; Epepe; Emri; Emine; Emil; Emen; Egoyne-nebi; Egoyne-lukan; Egoyne nebi; Egoyne lukan; Egoyn-odan; Egoyn odan; Eghoinmebbi; Eghoin-nebi; Efremeli; Ebi; Dzogbedodo; Cauri; Buna; Buma; Brimstone-wood; Bragba; Bouri; Boti; Bona; Blie; Black-barked terminalia; Black bark; Be-ie; Baye; Bassi; Basio; Banidi; Bajii; Bai-ti; Bai; Bahi; Bagyi; Awunshin; Amire; African yellow wood; African greenheart; Afia; Afara-dudu; Afara dudu; Afara duclu; Ada boumbra; Black Afara (Nigeria); Idigbo (United Kingdom); Lidia Lidia (Cameroon); Idigbo (Nigeria); Emeri (Ghana); Framire (Côte d`Ivoire); Baji (Liberia)
The tree reaches a height of 50 m. The bole is straight and clear to 23 m in length, buttressed and frequently fluted. The trunk diameter attains 100 to 170 cm.
Terminalia ivorensis is found scattered, it is abundant in primary, secondary and transitional forests.
West tropical Africa from Guinea to Cameroon.
It is a medium rotation species for plantation. The duration of the rotation is 30 years, to reach 40 to 45 cm diameter, or 40 years, to reach 45 to 50 cm in diameter.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 200 micras or more (large). Tyloses thin walled. Vestured pits. Vessels per mm2 6 to 10 (medium). Simple perforation plates. Vessel-ray pits similar t Paratracheal axial parenchyma scanty and/or vasicentric. Non-crystals in axial parenchyma cells. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays non-storied. Rays commonly 2 seriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Body ray cells procumbent with one row of upright and/or square marginal cells (Kribs-III). Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The heartwood is yellowish white to pale yellowish-brown, often greenish, it is not clearly demarcated. The silver figure is fine (barely visible).
6
Straight or slightly interlocked, sometimes with an influence on further processing operations.
Medium texture is reported in this species.
Timber of this species is low in luster.
Moderately durable to decay. Without preservative treatment, this species can be used only under risk of occasional re-humidification. It is not suited for uses with risks of permanent or long-lasting humidification. Sensible to termites attack. The heart
3
Growth stresses are reported in this species.
Silica Content: This timber is reported to have a negligible silica content. Silica contents over 0.05% may affect wood processing. Silica Value: 0
Nearly impossible to treat with a too much low penetration of the preservative substances.
0.46
0.50
5.2
3.6
Ease of Drying: Drying is moderately easy; some particular care is needed.
FR-4
1.5
728
115674
445
53
58
301
402
It is easy to saw.
Suitable for slicing, also suitable for peeling if treated.
Suitable for slicing, also suitable for peeling if treated.
Slight blunting effect; ordinary tools can be used for sawing and machining.
Machining of this species is reportedly easy.
Easy; no particular problems.
Moderately easy; tools must be cautiously sharpened.
30
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
No particular problem.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Can be polished without surface preparation.
This species can be used for steam bending.
No particular problems.
HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, common furniture, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, OTHER AND MUSICAL INSTRUMENTS, handicrafts, moldings
Please Provide Information To View Producer Information