Select Language:  

KOTIBé (Nesogordonia fouassieri)

Trade Name

Kotibé

Scientific Name

Nesogordonia fouassieri R.Cap.

Family

STERCULIACEAE

Common Names

Otutu (Nigeria); Danta (Ghana); Kotibe (Côte d`Ivoire); Danta (United Kingdom); Kondofindo (Zaire); Aborbora (Gabon); Naouya (Central African Republic); Ovoui (Cameroon); Ovoe (Cameroon); Kissinhungo (Angola); Kotibé

Scientific Name Synonyms

Cistanthera fouassieri A. Chev.

Description Of The Tree

Botanical Description

The tree reaches a height of 32 to 40 m. The bole is cylindrical, straight , up to 23 m in length. The trunk diameter attains 80 to 130 cm over the short buttresses.

Natural Habitat

Nesogordonia fouassieri is widely distributed but only rarely found in the wet sub-type forests. Occasionally in fringe forests.

Wood Identification

Anatomic Description Of Wood

Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 100 to 150 micras (small). Non-vestured pits. Vessels per mm2 more than 20 (very abundant). Simple perforation plates. Vessel-ray pits similar to int Apotracheal axial parenchyma diffuse and/or diffuse in aggregates. Axial parenchyma storied. Prismatic crystals in short chains in chambered axial parenchyma cells. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays storied. Rays 1 to 4 seriate. Body ray cells procumbent with one row of upright and/or square marginal cells (Kribs-III). Non-septate fibers. Fibers with simple to minutely bordered pits.

  • Wood Macro Photo Radial Plane
  • Wood Micro Photo Of Transversal Section

Availability

Cites Status

Unrestricted

General Wood Description

Color

The sapwood is pale, it has a thickness of 5 cm. The heartwood is red-brown, it is clearly demarcated. The silver figure is fine.

COLOR INDEX (1=Black, 7=Light yellow,white)

4

Grain

Straight or slightly interlocked, sometimes with an influence on further processing operations.

Texture

The texture of the wood is fine.

Luster

This species is low in luster.

Natural Durability

Moderately durable to decay. Without preservative treatment, this species can be used only under risk of occasional re-humidification. It is not suited for uses with risks of permanent or long-lasting humidification. Moderately resistant to termites attack

Natural durability index (1= Very high durability, 7=Vey low durability)

3

Internal Growth Stresses

Residual stresses are reported to be absent.

Resistance To Impregnation

Difficult to treat with only a low penetration of the preservative products.

Wood Physical Properties

Basic Density or Specific Gravity (O.D. weight/vol. green) (g/cm³)

0.73

Air-dry Density (Weight and volume at 12%MC) (g/cm³)

0.82

Drying Defects

Ease of Drying: Drying is rather slow but very good and without any real difficulty. Drying Defects: Slight cupping and shake are reported. It is somewhat prone to splitting, end checking and surface checking.

Recommended Dry Kiln Schedule

FR-6

Wood Chemical Properties

Wood Mechanical Properties

Bending Strength (MOR),12%MC (kgf/cm²)

1417

Compression parallel to fiber 12%MC (kgf/cm²)

797

Compression perpendicular to fiber 12%MC (kgf/cm²)

116

Janka hardness (side) 12%MC (kgf)

841

Janka hardness (end grain) 12%MC (kgf)

911

Workability

Sawing

Sawing of this species requires powerful equipment.

Rotary Veneer Cutting

Suitable for slicing, also suitable for peeling if treated.

Sliced Veneer

Suitable for slicing, also suitable for peeling if treated.

Blunting Effect

Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.

Machining

It needs powerful tools for processing. Possible difficulties caused by interlocked grain are reported.

Planing

Moderately easy; tools must be cautiously sharpened.

Moulding

Moderately easy; tools must be cautiously sharpened.

Turning

30

Boring

Moderately easy; tools must be cautiously sharpened.

Mortising

Moderately easy; tools must be cautiously sharpened.

Nailing

Pre-boring is necessary.

Gluing

Glues well if basic gluing technical rules are followed.

Sanding

Easy to perform; it gives good results.

Polishing

Can be polished without surface preparation.

Steam Bending

This species can be used for steam bending.

Response To Hand Tools

Working with hand tools is difficult.

REFERENCED USES

End Uses Summary

HOUSING GENERAL, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, TOOLS, tool handles, agricultural tools, CONTAINERS, truck bodies, truck flooring, NAVAL CONSTRUCTION, boat fins, boat oars, OTHER AND MUSICAL INSTRUMENTS, handicrafts

General Housing
  • 10 - Silica in Timbers
Boards
  • 13 - Dry kiln schedules for commercial woods. Temperate and tropical. Section III. Latin American (Mexico, Central, and South America) Woods–Conventional Temperatures
Flooring
  • 14 - Handbook of Hardwoods
Parquet
  • 15 - Empire Timbers
Frames
  • 16 - Woods of the World
Steps
  • 17 - Tree Conservation Database
Paneling
  • 18 - W3TROPICOS Missouri Botanical Garden
Fittings
  • 19 - Silica in Timbers
Furniture Cabinets
  • 21 - Tropical timbers of the world. Part III-Southeast Asian and Oceanian Species.
Furniture, Luxury
  • 22 - Dry kiln schedules for commercial woods. Temperate and tropical. Section IV-Asian and Oceanian Woods
Cabinet
  • 24 - Empire Timbers
Panels, Veneers
  • 25 - Directory of Timber Trade Malaysia
Faces
  • 26 - Annual Review and Assessment of the World Timber Situation 1998-ITTO
Decorative veneer
  • 28 - Ministry of Agriculture, Fisheries & Forest of Fiji
Turning
  • 30 - Embassy of Honduras in Japan
Ornaments
  • 31 - Embassy of Colombia in Japan
Turned Articles
  • 32 - Embassy of Cote d`Ivoire in Japan
Knife Handles
  • 33 - Embassy of Gabon in Japan
Lasts
  • 34 - Embassy of Indonesia in Japan
Tools
  • 42 - Utilización Industrial de Nuevas Especies Forestales en el Perú.
Tool Handles
  • 43 - Maderas de Bolivia (Características y Usos de 55 Maderas Tropicales)
Agricultural Tools
  • 44 - Atlas of Peruvian Woods
Truck Body
  • 53 - Timbers of the New World
Truck Flooring
  • 54 - Bulletin of the Government Forest Experiment Station N.157: Identification of Tropical Woods
Shipbuilding
  • 55 - Tropical Timber Atlas of Latin America
Boat Fins
  • 58 - Guía de Árboles de Bolivia
Boat Oars
  • 60 - Amazonian Timbers, Characteristics and Utilization Volume II; Curuá-Una Experimental Forest Station
Handcraft
  • 66 - Maderas latinoamericanas. VII. Caracteristicas anatomicas. propiedades fisicomecanicas, de secado, y tratabilidad de la madera juvenil de Cordia alliodora (Ruiz & Pav. Oken.)

Please Provide Information To View Producer Information

* Or, continue as guest