Select Language:
< Back MANSONIA BéTé (Mansonia altissima) Print Friendly View
Mansonia bété
Mansonia altissima A.Chev.
STERCULIACEAE
Bete (Côte d`Ivoire); Urodo; Pruno; Prono; Oprono; Ododo; Odo; Nkoul; Guissepa; Essai; Boroua; Bodua; Baule; Aprend; Anyi; African walnut; African black walnut; Mansonia (United Kingdom); Bete (France); Koul (Cameroon); Ofun (Nigeria); Aprono (Ghana)
Achantia altissima A. Chev.
The tree reaches a height of 40 m. The bole is usually straight, clear to 20 m in length, buttressed. The trunk diameter attains 70 to 100 cm.
Mansonia altissima is found in closed deciduous and semi-deciduous forests and scattered in the more arid zones as well. It occurs particularly in disturbed areas or light gaps in lowland moist forest. Regeneration is good after disturbance. National con
West Africa, from Cote d`Ivoire to Cameroon.
Contains some resins or extracts which could pose problems when machining or finishing.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 100 to 150 micras (small). Non-vestured pits. Vessels per mm2 more than 20 (very abundant). Simple perforation plates. Vessel-ray pits similar to int Apotracheal axial parenchyma diffuse and/or diffuse in aggregates. Axial parenchyma storied. Prismatic crystals in non-chambered axial parenchyma cells. 3 to 4 cells per parenchyma strand. Rays more than 10 per mm (abundant). Rays storied. Rays 1 to 4 seriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Body ray cells procumbent with one row of upright and/or square marginal cells (Kribs-III). Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The sapwood is white to pinkish white, it has a thickness of 2 to 4 cm. The heartwood is yellowish brown to dark grey brown with purple tinge, fades on exposure, it is clearly demarcated. The silver figure is fine.
4
Straight; grain has no particular influence on drying, machining and finishing qualities.
The wood is reported to be frequently medium textured.
This species is low in luster.
Very durable to decay; without preservative treatment. This species is especially suited for all the uses with risks of permanent or long-lasting humidification. Resistant to termites attack. Heartwood is resistant to Lyctus attacks.
1
For this species no growth stresses are reported.
Nearly impossible to treat with a too much low penetration of the preservative substances.
0.59
0.66
7.3
4.5
FR-1
1.6
1118
140563
606
80
82
533
634
It is easy to saw.
Suitable for slicing, also suitable for peeling if treated.
Suitable for slicing, also suitable for peeling if treated.
Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.
Possible difficulties caused by interlocked grain are reported.
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
30
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
No particular problem.
Difficult to glue because of the extracts content.
Easy to perform; it gives good results.
Can be polished without surface preparation.
It is well suited for wood bending uses.
No particular problems.
HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, cutlery, lasts, BENDING, chairs, NAVAL CONSTRUCTION, boat deck, port storage, OTHER AND MUSICAL INSTRUMENTS, handicrafts, shingle, moldings
Please Provide Information To View Producer Information