Select Language:
< Back OHIA (Celtis gomphophylla) Print Friendly View
Ohia
Celtis gomphophylla Baker
ULMACEAE
Ohia (Nigeria); Esa pa (Ghana); Esa kokoo (Ghana); Esa fufu (Ghana); Esa (Ghana); Ba (Côte d`Ivoire); Asan (Côte d`Ivoire); African celtis (United Kingdom); Celtis (Germany); Luniumbu (Zaire); Kayombo (Zaire); Bolunde (Zaire); Odou (Cameroon); Namanuka (Uganda); Mukokukoma (Uganda); Shiunza (Kenya)
Celtis durandii Engl.
The tree is not tall, from 10 to 25 m. The bole is usually 6 to 12 m long, heavily buttressed. The trunk diameter attains 80 cm.
Celtis gomphophylla is a tree of the lower canopy or understorey, it prefers secondary forests.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 100 to 150 micras (small). Tyloses thin walled. Non-vestured pits. Vessels per mm2 10 to 20 (abundant). Simple perforation plates. Vessel-ray pits sim Axial parenchyma confluent. Axial parenchyma in discontinuous tangential lines. Prismatic crystals in non-chambered axial parenchyma cells. 5 to 8 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays non-storied. Rays 1 to 4 seriate. Body ray cells procumbent with mostly 2 to 4 rows of upright and/or square marginal cells (Kribs-II). Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The sapwood is yellowish white. The heartwood is yellowish white to pale yellow, greenish-brown veining near the core, it is not clearly demarcated.
7
Straight or sometimes interlocked. Usually interlocked grain is absent or very slight, without any effect on further processing operations.
The texture is typically fine to medium.
Not durable; important risks of decay attacks at any processing step, from logs up to final products. It must receive preservative treatment. Sensible to termites attack. Heartwood is sensible to Lyctus attacks.
5
Easy to treat with a full penetration of the preservative products using vacuum-pressure method.
0.67
0.75
8.9
5.0
FR-7
1.8
1661
137565
601
It is moderately easy to saw.
Suitable for slicing, also suitable for peeling if treated.
Suitable for slicing, also suitable for peeling if treated.
Slight blunting effect; ordinary tools can be used for sawing and machining.
Machining of this species is reportedly easy.
Moderately easy; tools must be cautiously sharpened.
Easy; no particular problems.
30
Easy; no particular problems.
Easy; no particular problems.
Pre-boring is necessary.
Glues well if basic gluing technical rules are followed.
Easy to perform; it gives good results.
Can be polished without surface preparation.
This species can be used for steam bending.
No particular problems.
EXTERIOR GENERAL, rails, crossarms, crossties, HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, shutter boards, FURNITURE AND CABINETS, common furniture, PLYWOOD AND VENEER, faces, cores, common veneer, TURNING, ornaments, turned furniture, cutlery, lasts, PACKING, heavy packing, pallets, CONTAINERS, truck bodies, truck flooring, OTHER AND MUSICAL INSTRUMENTS, handicrafts, matches, moldings
Please Provide Information To View Producer Information