Select Language:
Otounga
Polyalthia suaveolens Engl. et Diels
ANNONACEAE
Ewai (Nigeria); Agudugbu (Nigeria); Otunga (Gabon); Dep (Congo); Modiengue (Central African Republic); Otungui (Cameroon); Otungo (Cameroon); Botunga (Cameroon)
Xylopia otunga Exell; Polyalthia oliveri Engl.; Polyalthia mortehani De Wild.; Polyalthia aubrevillei Ghesquiere Ex Aubre; Polyalthia acuminata Oliv.; Maba gossweileri Greves; Greenwayodendron suaveolens (Engl. & diels) Verdc.
The tree reaches a height of 30 to 43 m. The bole is slender, cylindrical and straight. It may be up to 30 m in length. The trunk diameter attains 70 to 100 cm.
Polyalthia suaveolens grows in coastal, evergreen forests.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 100 to 150 micras (small). Non-vestured pits. Vessels per mm2 6 to 10 (medium). Simple perforation plates. Vessel-ray pits similar to intervessel pit Axial parenchyma scalariform. Non-crystals in axial parenchyma cells. 5 to 8 cells per parenchyma strand. Rays less than 4 per mm (rare). Rays of two distinct sizes. Larger rays width 0. 1 mm or more and 2 mm or more in height. Rays non-storied. Rays 1 to 4 seriate. Larger rays more than 4 seriate. Heterogeneous rays and/or multiseriate heterogeneous rays. Oil and/or Non-septate fibers. Fibers with simple to minutely bordered pits.
Unrestricted
The heartwood is yellow or brown when dry, it is not demarcated.
6
Straight; grain has no particular influence on drying, machining and finishing qualities.
The wood is reported to be frequently medium textured.
0.76
0.86
9.7
3.7
2.6
1561
183523
804
117
72
926
984
Sawing of this species requires powerful equipment.
Suitable for slicing, also suitable for peeling if treated.
Suitable for slicing, also suitable for peeling if treated.
Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.
It needs powerful tools for processing. Possible difficulties caused by interlocked grain are reported.
Moderately easy; tools must be cautiously sharpened.
Easy; no particular problems.
30
Easy; no particular problems.
Easy; no particular problems.
Pre-boring is necessary.
Difficult to glue because of high density.
Easy to perform; it gives good results.
Can be polished without surface preparation.
Working with hand tools is difficult.
EXTERIOR GENERAL, poles, crossties, HOUSING GENERAL, flooring, fittings, FURNITURE AND CABINETS, cabinets, PLYWOOD AND VENEER, TURNING, TOOLS, agricultural tools, CONTAINERS, cooperage, OTHER AND MUSICAL INSTRUMENTS, handicrafts
Please Provide Information To View Producer Information