Seleccione Idioma:
< Volver MORA (Mora megistosperma) Vista Imprimible
Mora
Mora megistosperma (Pittier) Britton & Rose
LEGUMINOSAE
Pracuuba-Vermelha (Brazil); Pracuuba-Da-Várzea (Brazil); Pracuuba-Amarela (Brazil); Pracuuba (Brazil); Praculiba-Branca (Brazil); Mora (Venezuela); Nato (Ecuador); Alcornoque (Colombia); Mangle Nato (Colombia); Alcornoque (Panama); Alcornoque (Costa Rica); Pracouba (Brazil); Nato (Colombia); Paracuuba (Brazil)
Mora oleifera (Triana ex Hemsl.) Ducke; Dimorphandra oleifera Triana ex Hemsl.; Dimorphandra megistosperma Pittier
Tree size is reported to attain a height of about 30 m, with a trunk diameter that can reach up to 80 or 100 cm over the buttresses. The boles are cylindrical or sometimes irregular, with commercial lengths of about 15 m. It presents slim and tall buttres
Mora megistosperma occurs gregariously in the varzea forests and in swampy areas along river banks and temporarily inundated forests. It is also reported growing at the sea level in tidal areas and in mangrove forests.
Central and northern South America. It is reported in Costa Rica, Panama, Venezuela, Brazil, Colombia and Ecuador.
Wood diffuse porous. Vessels solitary and in short radial multiples. Tangential diameter of vessel lumina 150 to 200 micras (medium). Vessels per mm2 5 to 20. Simple perforation plates. Vessel-ray pits similar to intervessel pits in size and shape. Intervessel Axial parenchyma apparent with the naked eye. Axial parenchyma lozenge-aliform. Axial parenchyma confluent. Prismatic crystals in chambered axial parenchyma cells and/or in fibers. 3 to 4 cells per parenchyma strand. 4 to 10 rays per mm (medium). Rays 1 to 4 seriate. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Fibers with simple to minutely bordered pits.
Unrestricted
The sapwood is pinkish white, the heartwood is yellowish red with a dark brown tinge.
4
This species is reported to have interlocked grain.
The wood is mostly medium in texture.
The wood surface is described as moderate in luster.
It is resistant to decay, dry wood insects and termites attack.
2
0.72
0.81
7.2
4.0
Ease of Drying: The rate of drying is reported to be slow to moderate. Drying Defects: Twisting and cupping are reported.
UK-B; US-T2-C2
1.8
1265
155000
606
94
96
560
760
Sawing of this species is reported to be rather difficult.
It is not suitable for plywood because of its high density.
It is not suitable for plywood because of its high density.
Wood of this species produces a moderate blunting effect.
The timber is reported to plane with moderate difficulty because of interlocked grain. A reduced cutting angle of 20 degrees is recommended.
30
Good nail-holding, pre-boring is necessary.
This species has a fair behavior in gluing.
The material is reported to sand with moderate difficulty.
This wood yields a smooth surface in finishing.
Bending properties are reportedly moderate.
EXTERIOR GENERAL, bridges, poles, crossties, HOUSING GENERAL, flooring, steps, FURNITURE AND CABINETS, PLYWOOD AND VENEER, TURNING, TOOLS, agricultural tools, CONTAINERS, truck bodies, NAVAL CONSTRUCTION, boats, port pillar, port storage, OTHER AND MUSICAL INSTRUMENTS, handicrafts
Please Provide Information To View Producer Information