Seleccione Idioma:
< Volver BOSSé CLAIR (Guarea cedrata) Vista Imprimible
Bossé clair
Guarea cedrata Pellegr.
MELIACEAE
Bosse (Côte d`Ivoire); Diambi (Zaire); Ebangbemva (Cameroon); White guarea; Tshidiamakeka; Tenumeadomei; Telemia; Scented mahogany; Penkwa; Pahiapo; Ossoung; Onwamdua; Obodo blanc; Obobo-nofwa; Nigerian pearwood; Nigerian cedar; Ngbose; Mbosse`; Lombe; Lofun; Kwadwuma; Guissu; Guarea; Edoucie`; Ebangbemva; Ebangbembra; Dzana; Duruiti; Ditoke; Diambi; Cedron; Cedar mahogany; Bossi; Bosse`; Bossassa; Bosassa; Bosae; Bonsannua; Belii; Anokue; African cedar; Edoucie (Cameroon); Obobo (Nigeria); Scented guarea (United Kingdom); Bosse (Germany); Bosasa (Zaire); Obobo nofua (Nigeria); Kwabohoro (Ghana)
Trichilia cedrata A. Chev.; Khaya cunahailata De Wild.; Khaya canaliculata De Wild.; Guarea alitipetiolata De Wild.
The tree may reach a height of 10 to 16 m. The bole is straight, with widely spaced plank-like buttresses. The trunk diameter attains 30 to 70 cm. Log is banned for international trading.(Cameroon)
Guarea cedrata is a timber species found in some abundance in moist semi-deciduous forest and in the drier undisturbed areas of moist evergreen forest. It is reported in thickets on coastal plains, and on riverbanks. National conservation status in Cote
Species is widespread in tropical Africa.
Sometimes presence of resin.
Wood diffuse porous. Occasionally vessels exclusively solitary (over 90%). Tangential diameter of vessel lumina 100 to 150 micras (small). Non-vestured pits. Vessels per mm2 10 to 20 (abundant). Simple perforation plates. Vessel-ray pits similar to intervessel Axial parenchyma oblique and/or sinuous. Prismatic crystals in chambered axial parenchyma cells and/or in fibers. 5 to 8 cells per parenchyma strand. Axial parenchyma bands over 4 per mm. Rays non-storied. Rays commonly 2 seriate. Silica bodies in the ray cells. Homogeneous rays and/or sub-homogeneous rays (all ray cells procumbent). Body ray cells procumbent with one row of upright and/or square marginal cells (Kribs-III). Occasionally septate fibers present. Fibers with simple to minutely bordered pits.
Unrestricted
Pleasant odor.
The sapwood is pale color, it has a thickness of 5 to 10 cm. The heartwood is pinkish brown, it is clearly demarcated. The silver figure is fine (barely visible).
6
The grain is slightly but systematically interlocked.
The texture varies from fine to medium.
Durable to decay; this species can be utilized without preservative treatment for exterior joinery or similar uses. Moderately resistant to termites attack. Heartwood is resistant to Lyctus attacks.
1
No growth stresses are reported in this species.
Silica Content: Silica presence is reported. Amounts over 0.05% may affect wood processing. Silica Value: 0.09
Nearly impossible to treat with a too much low penetration of the preservative substances.
0.58
0.63
6.8
4.1
Ease of Drying: Drying is very slow and difficult to perform; defects are frequent. Drying Defects: Risks of distortions. Kiln Schedules: Schedule proposed as a reference by comparison with well known species taking into account to the general technological behavior of this species.
FR-6
1.6
966
128959
557
72
85
496
598
It is easy to saw.
Suitable for slicing, also suitable for peeling if treated.
Suitable for slicing, also suitable for peeling if treated.
Moderate blunting effect; stellited blades for sawing and carbide tools for machining are advised.
Possible difficulties caused by interlocked grain are reported.
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
30
Moderately easy; tools must be cautiously sharpened.
Moderately easy; tools must be cautiously sharpened.
Pre-boring is necessary.
Difficult to glue because of the extracts content.
Easy to perform; it gives good results.
Can be polished without surface preparation.
This species can be used for steam bending.
No particular problems.
HOUSING GENERAL, beams, joists, boards, flooring, parquet, frames, steps, panelling, fittings, FURNITURE AND CABINETS, luxury furniture, cabinets, PLYWOOD AND VENEER, faces, Decorative veneer, TURNING, ornaments, turned furniture, NAVAL CONSTRUCTION, boat deck, port storage, OTHER AND MUSICAL INSTRUMENTS, handicrafts, cigar boxes
Please Provide Information To View Producer Information